KIT100/150F22 100/150Hrs maintenance kit for Factory-R MY22

KIT100/150F22 100/150Hrs maintenance kit for Factory-R MY22 - Genuine Vittorazi Motors Parts

The KIT100/150F22 contains all of the parts required to do both the 100 hour maintenance as well as the 150 hours maintenance on your MY'22 Vittorazi Moster 185 Factory R, all in one convenient package!  Vittorazi maintenance kits also offer a better value as compared to ordering all of the required parts individually!

Please note this mainentance kit does not include the piston.  Vittorazi recommends replacing the M010 piston at 150hrs with the piston corresponding to your cylinder size (A,B,C,D, or E).

The KIT100/150F22 includes the following:

• Qty 2 ACC090 Ngk Iridium BR9EIX spark-plug
• Qty 1 AT093a Air-box rubber manifold with incorporated sponge
• Qty 1 C021f Security band (Set of 4)
• Qty 1 M005 Bearing 47/20/14 mm - C3 (Set of 2)
• Qty 2 M006 Oil seal viton 20/35/7 mm (Set of 2)
• Qty 15 M019 Copper lock nut high temperature 8 x 1,25 mm
• Qty 1 M031a Spark-plug cap (Selettra)
• Qty 1 M043 Starter rope 2,20 meters
• Qty 2 M094 Fixing band 50-70 mm
• Qty 1 M097 Series membranes and Gaskets Walbro WB
• Qty 1 M114 Bearing 42/20/12 mm (Set of 2)
• Qty 2 M117 Belt Poly V PJ483 15 grooves
• Qty 2 M139 Exhaust spring (Set of 5)
• Qty 2 M151a Antivibration mount 30 x 20 mm soft (left) 14/20 mm with Nuts
• Qty 1 M151b Antivibration mount 30 x 20 mm hard (right) 14/20 mm with Nuts
• Qty 1 MFR009 Piston roller bearing Factory-R
• Qty 1 MFR021a Antivibration mount 40 x 45 mm - M8 x 15 mm (Set of 2)
• Qty 1 MFR021b Antivibration mount 40 x 45 mm - M8 x 25 mm (Set of 2)
• Qty 1 MFR025 Complete series of gaskets and O-ring
• Qty 2 MFR082 Reed valve petal (Set of 2)
• Qty 2 MFR107a Drum/Pinion cap, Factory-R
• Qty 1 MFR200a Exhaust chromed Factory-R, initial part
• Qty 1 MP055k Kit Plastic hook (Set of 2) with Shim washers 12 x 18 mm (Set of 6) and Elastic ring
• Qty 4 MP093d Snaplock female Ø 16 mm, grey
• Qty 1 MP102 Complete clutch
• Qty 5 MP105 Seeger Ø 35 mm DIN 472
• Qty 1 MP106 Bearing 35/15/11 mm - 2Z and Bearing 35/15/11 mm - 2HRS
• Qty 5 MP107 Seeger Ø 15 mm DIN 471
• Qty 2 MP140 Heat shrinkable tubing (Set of 5)
• Qty 2 MP141 Security cable 45 cm with aluminum clamp (Set of 5)
• Qty 1 MP159 Noise absorbent material with Rivets
• Qty 1 MY201 Exhaust flange with assembled Bushing 40/50 hours and Springs

For any additional help, please don't hesitate to contact us!

For maintenance and installation help, please see the Vittorazi manuals and technical documents.